Reverse the installation steps when you wish to remove the DIMM module. Locate Pin 1 in the socket and 3. Xpress Recovery2 is designed to provide quick backup and restora- tion of hard disk data. Page 13 – 9 – Introduction Please use Intel approved cooling fan. Remove previously-created backup files to release disk space. Please make sure the CPU type is supported by the motherboard.

Uploader: Maugar
Date Added: 2 July 2012
File Size: 15.76 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 69021
Price: Free* [*Free Regsitration Required]

To check general asked questions based on a specific motherboard model, please log on to www. Please select the other settings for 4 channels output.

Gigabyte GA-8IG1000MK (Rev 2.x) Bios G2

gigabbyte AC power cord should only be connected to your power supply unit after ATX power cable and other related devices are firmly connected to the mainboard. Install the Central Processing U Disable this function if you are not using onboard USB 2.

Some advanced options are hidden in new BIOS version. Basic 6 Channel Analog Audio Output Mode Use the back audio panel to connect the audio output without any additional module.


Please contact your nearest dealer for optional front USB cable. The red stripe of the ribbon cable must be the same side with the Pin1. Standard Cmos Features Manual User can manually input the correct settings.

Gigabyte GA-8IGMK Bios – G2 – Win All

Press any key to startup XpressRecovery Check the pin assignment while you connect the front USB cable. Please note, you can have the alternative of using front audio connector or of using rear audio connector to play sound. Page of 96 Go.

Check if the memory install properly into the DIMM slot. It is recommended that Xpress Recovery2 be immediately installed once you complete installations of OS and all required drivers as well as software. Hardware Configuration PCB revision: Informing users that system might not boot up normally due to AGP 2X 3. The Main Menu For example: It is recommended that Xpress Recovery2 be immediately installed once you complete. Stereo Speakers Connection and Settings: Page 68 [Enter] to contiune or [ESC] to abort We recommend that you use the speaker with amplifier to acqiire the best sound effect if the stereo de is applied.


Enabled Enable USB 2. Below is a collection of general asked questions. Read the related expansion card’s instruction document before install the expansion card into the computer.

You have completed the flashed and now can restart system. Q-Flash utility is a pre-O. Please follow next step to install the function!

Page 10 CPU, chipset and most of the peripherals. Pin1 indicator Pin1 indicator 4.

Gigabyte GA-8IG1000MK User Manual

To print the manual completely, please, download it. Connect ribbon cables, cabinet w A window will appear as right picture if you setup the devices properly.

Please note that the DIMM module can ga-8ig1000mk fit in one direction due to the one notch. If the device picture shows different from what you set, please press “Manual Selection” to set.