Remove the bracket opposite the slot that you intend to use. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Turn on the system. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. PCB color and bundled software versions are subject to change without notice. This port connects the rear speakers on a 4-channel, 6-channel, or 8-channel audio configuration. Remove the system unit cover if your motherboard is already installed in a chassis.

Uploader: Gomuro
Date Added: 25 June 2016
File Size: 65.29 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 97654
Price: Free* [*Free Regsitration Required]

Secure the card to the chassis with the screw you removed earlier. PCB color and bundled software versions are subject to change without notice. Select Y e s to load default values. Doing so will damage the motherboard! Remove the onboard battery. Push pin Motherboard hole Chapter 1: Insufficient air flow inside the system may damage the motherboard components. Select the option 2.

Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. Connect the SATA signal cables. DO NOT place jumper caps on the asuus connectors. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.


Remove the jumper caps only when you intend to use the chassis intrusion detection feature. Backwards compatible with current USB 1.

ASUS P5GD1 PRO – motherboard – ATX – LGA775 Socket – i915P

Repeat step 2 to select other RAID drives. Information to prevent injury to yourself when trying to complete a task.

For multimedia computer systems used mainly for audio and video editing, a higher array block size is recommended for optimum performance. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

ASUS P5GD1 Pro User’s guide – e p5gd1 pro | Martin Lacetti –

Connect a SATA power cable to the power connector on each drive. Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. Doing so can damage the motherboard. Detailed descriptions of the BIOS parameters are also provided.

Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5. Resetting a disk causes all data on the disk to be lost.


P5GD1 PRO | Motherboards | ASUS Global

Brand and product names mentioned are trademarks of their respective companies. The following confirmation message appears. Find the proper orientation and push down firmly until the connectors wsus fit. Use the setup procedures presented in this chapter for reference only. Install the software drivers for the expansion card. The socket alignment key should fit Alignment key into the CPU notch.

A u t o – loads the optimal settings for the system. Replace the system cover.

If an item is user- configurable, you can change the value of the field opposite the item. If you install two hard disk drives, you must configure the second drive as a slave device by setting its jumper accordingly.